|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
WM-C1601M-1TNNC Contents Page (1) Electronic Units ................................................................................................ 4 1.1 Absolute Maximum Ratings...................................................................................... 4 1.2 Electrical Characteristics .......................................................................................... 4 1.3 Interface Pin Function................................................................................................ 5 1.4 Power Supply for LCD Module ................................................................................ 6 1.5 Block Diagram with Display RAM Address and Initialization Table................. 7 1.6 Character Generator Rom map............................................................................... 8 (2) Electro-optical Units......................................................................................... 9 2.1 Electro-optical Characteristics ................................................................................. 9 2.2 Optical Definitions ...................................................................................................... 9 (3) Mechanical Units .............................................................................................11 3.1 Mechanical Specification ........................................................................................ 11 3.2 Mechanical Diagram ................................................................................................ 12 3.3 Packing Method ........................................................................................................ 13 (4) Quality Units ................................................................................................... 14 4.1 Specification of Quality Assurance ....................................................................... 14 4.2 Standard Specification for Reliability.................................................................... 21 4.3 Precautions in Use of LCM .................................................................................... 23 Reference Data : Sitronix ST7066U-0A Specifications WM-C1601M-1TNNC 3/23 (1) Electronic Units 1.1 Absolute Maximum Ratings TOP TST VI VDD-VSS VDD-V0 0 -20 -0.3 -0.3 VDD-10 - +50 +70 VDD +0.3 +7.0 VDD +0.3 C C V V V Be sure that you are grounded when handing LCM. 1.2 Electrical Characteristics (VDD=5.0V, Ta=25 ITEM SUPPLY VOLTAGE FOR LOGIC SUPPLY VOLTAGE FOR LCD INPUT HIGH VOL INPUT LOW VOL OUTPUT HIGH VOL OUTPUT LOW VOL. SUPPLY CURRENT FOR LOGIC USED IC *IDD Measurement condition is for all pixels on display C) SYMBOL CONDITION MIN. 4.5 4.3 0.7 VDD - TYP. MAX. 5.0 4.5 2.5 5.5 4.7 VDD 0.2 VDD VDD 0.1 VDD 3.0 UNIT V V V V V V mA VDD -VSS VDD -V0 VIH VIL VOH VOL *IDD - IOH=-0.04mA 0.9 VDD IOL= 0.04mA VDD=5.0V - ST7066U-0A WM-C1601M-1TNNC 4/23 1.3 Interface Pin Function CN1: NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 SYMBOL VSS VDD V0 RS R/W E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 NC NC I/O P P I I I I I/O I/O I/O I/O I/O I/O I/O I/O NO CONNECTION NO CONNECTION DATA BUS GND ( 0V ) VDD ( +5V 5% ) CONTRAST ADJUSTMENT REGISTER SELECT SIGNAL READ / WRITE SELECTION ENABLE SIGNAL FUNCTION WM-C1601M-1TNNC 5/23 1.4 Power Supply for LCD Module 1. Signal Supply Voltage Types V DD V DD -V 0 (V LCD ) LCM V0 V DD VR V SS VDD -V0LCD Driving Voltage 2. Dual Supply Voltage Types V DD V D D -V 0 (V LC D ) V DD V0 LCM VR V EE V SS VDD -V0LCD Driving Voltage WM-C1601M-1TNNC 6/23 1.5 Block Diagram with Display RAM Address and Initialization Table Relations between DDRAM addresses and positions on the LCD are shown below. The DDRAM address (ADD) is set in the address counter (AC) and is represented in hexadecimal. Initialization Table: Instruction 1. Function Set Code 001110xx Description 8-Bit, 2-Line, 5x8 Dots,1/16 Duty WM-C1601M-1TNNC 7/23 1.6 Character Generator Rom map WM-C1601M-1TNNC 8/23 (2) Electro-optical Units 2.1 Electro-optical Characteristics ITEM VIEW ANGLE (V) VIEW ANGLE (H) CONTRAST RATIO RESPONSE TIME RESPONSE TIME OPERATING VOLTAGE FOR LCD DRIVE METHOD BIAS LCD TYPE VIEWING DIRECTION 1/5 TN (Positive / Reflective) 6 O'CLOCK SYMBOL CONDITION CR tr td VLCD DUTY CR2 CR2 Ta=25 Ta=25 Ta=25 Ta=25 MIN. 0 -30 150 150 4.3 1/16 TYP. 4 4.5 MAX. +30 +30 300 300 4.7 UNIT deg. deg. ms ms V 2.2 Optical Definitions Nonselected Condition Brightness Selected Condition Nonselected Condition 90% 100% 10% tr Rise Time td Decay Time (fall time tf) Response Time WM-C1601M-1TNNC 9/23 12:00 9:00 3:00 6:00 y (back) Eye (left) x' x (right) y' (front) View Direction View Angle Brightness Brightness cure of selected segment B 2 Brightness curve of nonselected segment B 1 Driving Voltage Perpendicular line (=90) Brightness at nonselected segment (B2) Contrast ration = Brightness at selected segment (B1) Contrast ration (CR) WM-C1601M-1TNNC 10/23 (3) Mechanical Units 3.1 Mechanical Specification ITEM NUMBER OF CHARACTERS CHARACTER FORMAT MODULE DIMENSION VIEWING AREA ACTIVE AREA DOT SIZE DOT PITCH CHARACTER SIZE CHARACTER PITCH APPROX. WEIGHT BACK LIGHT STANDARD VALUE 16(CHARACTER) x 1(LINE) 5x8 80.0 (W) x 36.0 (H) x 9.5 (MAX)(T) 64.5 (W) x 15.0 (H) 59.62 (W) x 6.56 (H) 0.55 (W) x 0.75 (H) 0.63 (W) x 0.83 (H) 3.07 (W) x 6.56 (H) 3.77 (W) x 6.56 (H) 24.9 UNIT dot mm mm mm mm mm mm mm g WM-C1601M-1TNNC 11/23 3.2 Mechanical Diagram WM-C1601M-1TNNC 12/23 3.3 Packing Method 1. Packaging Material : (per carton) NO 1 2 3 4 5 6 Item Model Dimensions (mm) Unit Weight (Kg) Quantity LCM Module Tray Product Box Carton Package Bag Total Weight WM-C1601Q-1GNNa WM-C1601M-1TNNC V186 C01 C61 C5 13.1 13.8 PETA 122.0*33.0 80.0*36.0 320*217 320*219*70 475*345*389 467*321*0.08 Kg 5% 5% 0.034 0.0249 0.06 0.131 1.208 0.023 320 50 10 1 10 2. Packaging Specifications and Quantity : (1) LCM quantity per tray : no per row (2) LCM quantity per box : no of trays (3) Total LCM quantity in carton : no of boxes 2 8 32 x no per column x quantity per tray x quantity per box 4 4 10 = = = 8 32 320 Use empty tray Use package bag Put products into the tray + = Tray stacking The tape to seal carton Carton label A B Detail B Scotch tape A Tray 4 Tray 3 Tray 2 Tray 1 Rotate tray 180 degrees and place on top of stack. Check the tray stack using Fig. B. QC inspection label 3. Label Specifications : (1) QC Inspection Label MODEL: LOT NO: QC CHECK: DATE: Remark 32.0 Label Color----Green 90.0 (2) Carton Label Wintek Part No: WM-C1601Q-1GNNa WM-C1601M-1TNNC Purchase Order No: (According to each order) Q'ty: (According to shipping) 42.4 Label Color----White 105.0 WM-C1601M-1TNNC 13/23 (4) Quality Units 4.1 Specification of Quality Assurance WM-C1601M-1TNNC 14/23 WM-C1601M-1TNNC 15/23 6. Inspection specification WM-C1601M-1TNNC 16/23 WM-C1601M-1TNNC 17/23 WM-C1601M-1TNNC 18/23 WM-C1601M-1TNNC 19/23 WM-C1601M-1TNNC 20/23 4.2 Standard Specification for Reliability 50 0 70 -20 40 90 WM-C1601M-1TNNC 21/23 WM-C1601M-1TNNC 22/23 4.3 Precautions in Use of LCM WM-C1601M-1TNNC 23/23 |
Price & Availability of WM-C1601M-1TNNC |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |